When it comes to dialing in your Sur-Ron Ultra Bee, it’s easy to focus on power mods and flashy parts — bigger rotors, throttle upgrades, controller tunes, or even a full suspension setup. But one of the most underrated upgrades that completely transforms your riding experience is brake levers.
Yes, brake levers.
They might not have the same “wow” factor as a massive rear sprocket or a Warp 9 bar mount, but once you install a set of Warp 9 Ultra Bee Brake Levers, you’ll instantly feel the difference in every single ride. These aren’t just replacements for worn-out stock parts — they’re precision-built mods designed to give you smoother control, more confidence, and that premium feel you only get from top-tier components.
🧠 Why Brake Levers Matter More Than You Think
Your brake levers are your primary link to the bike’s stopping power. Every time you grab the lever, you’re translating pressure from your fingers into braking force at the caliper. Stock levers on the Sur-Ron Ultra Bee do the job, but they’re often made with cheaper casting methods that flex, feel inconsistent, and don’t always match your hand ergonomics.
Warp 9 took that personally.
Their CNC-machined 6061-T6 aluminum levers are built to eliminate that slop and flex. The result? Instant feedback. When you squeeze the lever, you feel exactly what the caliper is doing — no delay, no sponginess, just smooth, progressive braking.
This is the kind of rider feedback that gives you confidence when you’re pushing your bike harder — whether you’re ripping through trails, flying over jumps, or cutting tight lines on pavement.
⚙️ Built for Performance, Not Just Looks
Every Warp 9 product has a reputation for precision and durability, and the Ultra Bee Brake Levers are no exception. Machined from solid aluminum billets, they’re lightweight yet incredibly strong, offering a major durability upgrade over OEM parts.
The anodized finish protects against corrosion, fading, and scratches, keeping your cockpit looking fresh even after hard use. Each lever comes with stainless hardware and smooth pivot action — so instead of that gritty, stiff feel you get from worn-out stock setups, these move like butter.
And because Warp 9 actually rides and tests what they make, the levers are engineered to fit perfectly on OEM master cylinders and perch mounts. No weird spacing, no grinding, no shims. Just bolt on and go.
🔧 Fully Adjustable for Your Comfort
Not every rider grips the same way. Some ride with two fingers on the lever; others use just one. Some wear bulky gloves, others go barehanded. That’s where the adjustable reach dial on the Warp 9 Ultra Bee Brake Levers really shines.
With a quick twist, you can bring the lever closer or farther from the bar to perfectly fit your hand size and riding style. Whether you want a short, snappy pull for stunt riding or a longer reach for precision modulation, you’re in control.
This level of adjustability doesn’t just make the bike more comfortable — it actually helps you ride better. Proper hand position reduces fatigue, increases control, and gives you that “in-tune” feel that lets you push your bike harder and react faster.
⚡ The Difference You’ll Feel Immediately
Upgrading to Warp 9 levers is one of those mods that changes the feel of the bike instantly. You’ll notice:
-
More consistent braking power thanks to rigid construction.
-
Smoother modulation for better control in corners or downhill sections.
-
Quicker return when you release the lever.
-
Better comfort from improved ergonomics and adjustability.
-
Longer life span compared to stock levers that bend or fatigue over time.
And because the Ultra Bee is heavier and faster than smaller bikes like the Light Bee X, high-quality brake components are even more important. The extra torque and weight mean your braking system needs to perform flawlessly — especially when you’re descending steep trails or blasting through urban rides.
🏍 Made for More Than the Ultra Bee
Even though these levers are designed specifically for the Sur-Ron Ultra Bee, their DNA carries over from Warp 9’s entire e-moto lineup. The same level of design and performance can be seen in their levers and parts for the Talaria Sting R, E-Ride Pro, and 79 Bike models.
So, if you’re building a full Warp 9 setup — bars, stem, rotors, sprockets, pegs, and levers — you’re creating a bike that’s tuned, responsive, and built to last. These upgrades aren’t just for looks — they’re real performance mods that translate to faster reaction times, tighter control, and fewer mechanical failures down the road.
💪 CNC Machining vs. Cast Stock Levers
It’s worth explaining why CNC-machined aluminum makes such a huge difference. OEM levers are typically cast, meaning molten metal is poured into a mold. It’s cheap, but it leaves tiny air pockets and inconsistencies that weaken the part.
Warp 9 starts with a solid billet of 6061-T6 aluminum and machines each lever with precision down to the thousandth of an inch. The result? No air pockets, no weak spots — just dense, uniform metal that can handle real-world abuse.
So, when you crash, drop the bike, or slam your levers into a rock or handlebar, Warp 9 levers are far more likely to survive intact. That’s why riders call them “ride-savers” — because one quality lever upgrade can literally save your whole brake setup in a fall.
🧩 Simple Install – Massive Difference
Like most Warp 9 upgrades, these levers are plug-and-play. Installation can be done with basic hand tools in under 10 minutes. Pop the stock lever off, line up the pivot bolt, grease the joint if needed, tighten it down, and adjust your reach.
No cutting, no modification, no special adapters. Just a clean fit that works.
And once they’re installed, you’ll feel it every time you pull the brake — that solid, confident stop that stock levers just can’t deliver.
🎨 Style That Matches Performance
Warp 9 parts aren’t just about performance — they look incredible too. With a clean anodized finish and laser-etched branding, the Ultra Bee Brake Levers complete your cockpit with that premium custom look.
Whether you’re matching your color scheme or keeping it stealthy with black or gunmetal, these levers are a subtle but powerful statement piece. They say you care about performance and style — two things every e-moto rider values.
🚀 Why This Upgrade Belongs on Your Bike
If you’ve already added mods like Warp 9 rotors, sprockets, or bars, don’t skip your controls. The brake lever is one of the most critical touch points between rider and machine — and once you upgrade it, you’ll realize how much better your bike could have felt all along.
For around the same cost as a decent dinner out, you can dramatically improve your braking precision, comfort, and safety. And since Warp 9 parts are built to last, it’s a one-time investment that pays off on every single ride.
🏁 Final Thoughts — Ride with Confidence
The Warp 9 Ultra Bee Brake Levers are one of those rare upgrades that combine real-world performance with premium craftsmanship. You’ll notice smoother braking, tighter feel, and better overall control — all while giving your cockpit that clean, pro-level look.
If you’re serious about your Sur-Ron Ultra Bee build, this is one upgrade you shouldn’t skip. At Proper Emoto Co, we ride what we sell — and we can confidently say these are the kind of mods that make your bike feel “just right.”
Upgrade smart. Ride in style.
Get your Warp 9 Ultra Bee Brake Levers today and feel the difference for yourself.
